aironet 2800 power on 2960

[bouchal-38]

hello, 

when i plug my ap 2800 on my 2960X-FPS-L, i see only 15.4Watts on the 'sho power inline' and on my WLC, how ever, i know that hose AP needs more power, how can i enable the full power(POE+ or 802.3at) on my switch?

there is no way to have the 30W available?

Tx for an answer.

B

[Daniel Ordóñez Flores]

Hi @bouchal-38 

If the Switch has enough power, unde interface configuration you can choose:

power inline {auto [max max-wattage] | never | static [max max-wattage]}

Try with auto, CDP must negotiate the correct power

[Leo Laohoo]

Post the complete output to the command "sh power inline".

[victor.mansson]

Make sure CDP enable is set on the switchport and make sure you don't have "no cdp advertise-v2" on the VLAN for the AP.