08-26-2016 09:36 AM - edited 07-05-2021 05:43 AM
Any help on this trap message? Any setting i can look for
AP 'AP39', MAC: 58:bc:27:3a:fc:00 disassociated previously due to Link Failure. Uptime: 0 days, 16 h 08 m 18 s . Reason: Capwap WTP Event request.
Thanks
Mike
09-14-2016 12:13 PM
Have you found a solution to this problem yet? Many of my APs are constantly disassociating.
09-14-2016 01:38 PM
Unfortunately no.
07-18-2017 06:45 PM
Got the same issue, I have just logged a TAC case to find the cause and solution. I will update what TAC advises
09-28-2017 12:10 AM
Hi,
Can you share what solution TAC had in mind?
Kind regards,
Norbert
01-09-2018 11:54 AM
Have you got any Update from the cisco TAC .
for this :-- MAC: 58:f3:9c:94:09:b0 disassociated previously due to Link Failure. Uptime: 76 days, 04 h 07 m 06 s . Reason: Capwap change state event request.
01-10-2018 01:20 AM
Hi Lokesh,
Are these APs in Local mode or Flex mode ?
Are you seeing this issue on all the APs of a particular WLC ? or some APs connected to a particular site/switch ?
Do these APs actually reboot during dissociation ? or they just dissociate but don't reboot ? Can be checked by the command "show ap uptime". A difference in the "AP upTime " and "AP association time" will fetch the answer.
Cheers,
Manish
03-08-2018 04:25 AM
Hello,
I had the same problem, do you have any solution?
217 Thu Mar 8 11:58:55 2018 AP 'apwinfpa_vwlc', MAC: b4:de:31:0d:9c:40 disassociated previously due to Link Failure. Uptime: 0 days, 11 h 38 m 03 s . Reason: Capwap WTP Event request.
AP Name Ethernet MAC AP Up Time Association Up Time
------------------ ----------------- ----------------------- -----------------------
apwinfpa_vwlc 6c:b2:ae:53:71:6c 0 days, 13 h 02 m 51 s 0 days, 00 h 40 m 24 s
04-04-2018 07:08 AM
08-24-2018 01:34 AM
Hi All,
I am trying to deploy the remote office with APs however WLC only shows 7APs( HQ: 5 Aps+2 Aps out of 5) , there is link failure and APs are not able to join so trying my head in for around a week.
Any solution to it ?
Regards,
Ali Rind
12-10-2020 12:30 AM
I too have this problem, do we have any solution for this, even modified the AP Retransmit Config Parameters to 8 and 5 but lo luck.
cisco prime displays following message :
802.11a/n/ac' interface of AP 'PAR-LAP-1' associated to controller
'KZD-WLC-1 (10.4.47.6)' is down. Reason: Radio reset due to (118) New
Discovery
can some one explain about this it will be really appreciating.
Thank you !!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide