AP1242-ag as a supplicant

[emilioramos]

Hi,

How to configure LAP 1242AG to authenticate it self as a supplicante on the 802.1x interface switch?

Best regards,

Emilio

[Amjad Abdullah]

Emilio,

I fear this is not possible.

You can not configure the AP as a supplicant on the neighbor switch.

Sent from Cisco Technical Support iPad App

[stefan.angerer]

Hi,

I think this is what you are looking for:

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70lwap.html#wp1366812

Configuring Authentication for Access Points

You can configure 802.1X authentication between a lightweight access  point and a Cisco switch. The access point acts as an 802.1X supplicant  and is authenticated by the switch using EAP-FAST with anonymous PAC  provisioning.

This feature is supported on the following hardware:

•Cisco Aironet 1130, 1140, 1240, 1250, 1260, and 3500 series access points

[...]

Hope that helps!

Stefan

[Amjad Abdullah]

Ya this is for lightweight. I expected the question about autonomous APs i dont know why! Although not mentioned.

+5

Sent from Cisco Technical Support iPad App

[stefan.angerer]

Emilio has written "LAP 1242AG" that's why I suppose we're talking about controller stuff.

Otherwise you're right of course

regards

Stefan

[Amjad Abdullah · Accepted solution]

Believe me I didn't see that "L". I think i should fix my broken glasses anyway

Sent from Cisco Technical Support iPad App