07-28-2023 03:03 AM
Hi,
I am having an issue with AVC statistics on a foreign anchor setup using 9800 controllers.
Anchor is on 17.3.6
Foreign is on 17.9.3
No data on the anchor for any of the clients connected via the foreign. Clients connected directly still show data.
I found a statement in config guide for 17.9.3 where export anchor is not supported for AVC-Based Selective Reanchoring but not using the feature as a far as I know.
I wanted to check if this feature is supported at all.
Thanks in advance.
08-03-2023 04:58 AM
08-03-2023 09:13 AM
Any advice on the issue i am experiencing as AVC configuration is simple to enable but I am seeing no statistics.
08-04-2023 03:55 PM
Since you get AVC for locally connected clients (via APs managed by local WLC), I would look at "Policy Profile" configuration for this anchored SSID. Make sure in both WLCs (Anchor & Foreign) you have enabled AVC in that Policy Profile.
I have similar setup (Anchor with C9800-CL where foreign is C9800-80), all running 17.9.3 and no issue of getting AVC on Anchor WLC
HTH
Rasika
*** Pls rate all useful responses ***
08-09-2023 03:51 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide