03-01-2011 05:57 AM - edited 07-03-2021 07:53 PM
Hi All,
I'm looking for a basic WPA configuration for AP1142n. This should allow connections upto 300 Mbps. Best should be a script config.
Authentication should be local radius server.
Thanks for your help.
Regards,
Christian
03-01-2011 06:08 AM
You need to use WPA2/AES along with 40mhz channel width and WMM enabled in order to achieve up to 300mbps. This is the 802.11N standard when using WPA2.
Sent from Cisco Technical Support iPhone App
03-01-2011 06:09 AM
Is this an IOS AP or do you have a WLC? There are many sample configurations on the cisco website.
Sent from Cisco Technical Support iPhone App
03-02-2011 12:04 AM
Hi Scott,
Thank you for your answer. It's an IOS (standalone).
By the way, is there some paper explaining how to configure a Cisco AP 1142n ? Further I would like to inprove my knowledge of the configuration of such device.
Regards,
Christian
03-01-2011 08:19 AM
Hi,
Here is the configuration example link..
BTW , Scott covered everything...
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide