Wireless

I have the following setup and need help with passing traffic over the wireless bridge. I have a Cisco 829 router with an internal AP and a 2.4GHz antenna and a cellular, 5 GHz antenna combo which is in a vehicle. I have a Cisco 1941 router at the HQ...

Company has 30+ WLAN controller.  Could someone tell me how to find or create a report that shows serial number of all the WLAN controllers? Thanks,

Hello I'm a beginner We are using a 5508 controller and have Ap's deployed. Sometimes a Ap wont connect until the parent Ap get rebooted.  Any help?? Thanks Mike

Hi, I need to configure 2 WLC's 5508 model in HA. I have only 29 licenses with my active WLC. Is it possible to configure HA?I heard we need at-least 50 license to do HA for WLC 5500 series. Also my product version in 7.6. We don't need extra license...

I need know if Cisco WLC 4404 support certificate type encryption SHA-2. My question is because i'm trying load a certificate with encryption SHA-2 on cisco WLC 4404, but the load is failed. I do in Cisco WLC 5520 the same certificate (is a certifica...

Hi, We use Cisco AnyConnect (4.2.01035) on our desktop build to connect to our systems via VPN. The AnyConnect works great. However, we use Dell KACE to distribute scripts/patches/software. The issue we are experiencing is with Laptop users. When the...

Release 8.0.140.0 is now posted in CCO, the beta program is over Thanks for your interest! Updated August  26h. Resolved Caveats up to 8.0.134.71: CSCuq28038 Hop2- multiple attempts to rejoin WLC in very-fast convergence CSCur63031 AP error: %ENTROPY...

Hi,  Our department just purchased the AIR-SAP2602E-A-K9 that will be replacing the 1250ap.  The original setup has 1 external antenna connected to each access point.  They are planning to continue with this one antenna setup.  By default diversity i...

Hello . My question is :  is the Antenna AIR-ANT2440NV-R Capable with the AIR-AP2802I-E-K9 ? There is any where a matrix table or file  where help me to check it ?

What issues will we experience when downgrading from release 8.2 to 8.1 on a 5500 wireless controller? What is the recommended process for a successful downgrade? Thanks!

There was a time when certain lightweight APs could be converted to autonomous mode, but would be limited to survey mode. I see the latest IOS release is 15.3(3)JD. I would like to convert a Cisco 3500 series AP to autonomous. Do you know if this sof...

Hi, I ordered new Cisco Aironet 1702i AP and I need to prove compliance with version 1.8.1 of radio standard EN 301.893 (due to customs importation and frequency regulation policies). The last documentation found (see attachment page 4) was updated o...

We have a new AIR-CAP3702E-B-K9 access point and it will power up and work fine on POE.  When I look in the wireless controller it does show that it is running on 15w power.  This AP is going to a site that does not have POE switches so we have a Cis...

we are trying to connect AP 3802i APs to 3850 switches with MGIG ports and we see the APs come up and they get an IP address, gateway, and DNS information, but they don't seem to be able to perform a controller discovery?  Has anyone seen an issue wi...