Wireless

HiI'm seeing a couple of our APs changing channel quite a few times (over 200 in the last 7 days!) and on Cisco Prime Infrastructure it says it was due to signal 100%. Does it mean it is seeing a loss of 100% through interference at times?

Can someone explain to me the purpose of the WLAN controllers?When should one choose to deploy lightweight AP instead of the classic one (1100, 1200).Thanks

Hi,Actually, I work with wlc version 7.2.111.3, I saw some new version, could you suggest to me one if you have already tested it . For the new version IPV6 is required.furthermore, for don't lost all the configuration could you tell me how I can mak...

We are going to purchase new wireless equipments.Now I have 2 questions about Wireless Technology.1) If vWLC was down. Are 3 AccessPoint still working without controller?2) I can't understand FlexConnect clearly. Is there any help in this situation?I...

removed

One of my interns was sent to diagnose an access point being out of service.  They cycled the POE to the device but it would still not work corectly.  They noticed that the LEDs of the device were RED for ethernet and green for radio.  The center LED...

hi , my WCS version 7.0.220, not send reports and alamr. sheduled status is expired and i can't reciv report.help, please

Hello all,Got a design question here. For hallways with offices on each side of the corridor, or hallways with corners, which AP do you like best? Internal or external? If external, which antenna have you had the best success with?Sent from Cisco Tec...

Hi all,I work for a school district and we have around 400 iPads that, when not in use or using an internet-necessary application, aren't showing up in our ARP tables.  It's not only for security and inventory, but also to keep track of what  our stu...

Hello!Our school wi-fi network has web-auth configured to login against AD (ldap).  Everything appears to work fine in a classroom with up to about 20 clients.  Once we get past that number web-auth freezes on all the screens where students have not ...

WLC 5500 can't detect LAP1040 either in the same vlan or on different vlan . i attached the scenario and configuration on the file .first i didn't make any configuration on LAP to make it match country code i configured in controller . i just setup t...

Good Morning,I have some questions regarding flex connect deployments with environments that are purely Apple (MAC).   The area is about 10,000 sq feet top floor office space in NYC. We havea bout 5 access points (unfortunatley vetically mounted) cov...