Is there any reason why 4.1.181 was pulled from CCO? I just upgraded to 4.1.181 on all my 4400s. I'm not experiencing problems on 4.1.181 but would rather know the reason why it is no longer available...Ty
Is there any reason why 4.1.181 was pulled from CCO? I just upgraded to 4.1.181 on all my 4400s. I'm not experiencing problems on 4.1.181 but would rather know the reason why it is no longer available...Ty
Hello Friends,I am looking for a Cisco Aironet (probably 1242 or 1231) for my new WLAN project but I am consused whether they support WPA or WPA2 personal (PSK) or not? I dont have a radiaus server and I need some better encryption(not WEP) which can...
Hi,I use a WMIC C3205 within a MAR3200 as workgroup bridge in a test bed environment. The other side of the radio link is made of LAP 1242AG controlled by a WLC2006. Only one AP is used for the time being and the link test results provide RSSI around...
I met a problem resently that in a chemical plant they need wireless but laying cable is somehow prohibited. Thus may I just cascade one 1240 on another one using Yagi antenna (Since 1240 has 2 antennas I can use another one to have the coverage)?
I have received this message from WCS and the ap's radio interfaces were down and then disassociate the WLC, and ap did not up again, but there are no clients and not many ap near,what happen?
iam having a hard time to configure wireless option on 877w. This router can discover wireless clients, ie laptops, but cant provide IPs even dhcp was enabled on this router. please advise.
I am competing against shortel, and my client wants all the details of our speakerphones. Shortel claims they have18 speakers in one phone... Please provide me with all the technical
Hello,I'm under the impression that each 2006 controller can only support up to 6 access points. Can someone confirm this for me? I'm unable to find documentation on this device through cisco as the 2000 controllers are EoS/EoL now..Reason I ask is, ...
Hello Cisco Friends,I am a newbie here with MAC filtering and APs.I am working on the project to configure Aironets 1200 for WLA and for that I need to set the MAC filtering so that only particaular machines are allowed.I have read the documentation ...
I have some 7921 phones. I am trying to connect them using a 4404 wlc on firmware 4.1.181.0I can connect using wep, but it wont authenticate using wpa2. I have tested the ssid with my laptop and it works, but with the phone it isnt even hitting the r...
Observing the administration vlan where the APs is it is seen that every 60 seconds the APs a "Gratuituous carries out ARP reply". TO that should you? I have looked for in the documentation of Chaos without finding any explanation, as well as in the ...
Is there any Cisco phone or IP based phone that works with the Cisco system that has the digital numbers on the hand receiver of the phone. This must not be wireless. i.e.) Hospital maternity ward is looking for a phone that would have the touch pad ...
Im fairly new to the aironet config options, Im use to the simple linksys interface. But I want to make sure my wifi connections are encrypted and need authentication before establishing a connection to the ap. I dont have a radius server or key mgmt...
Hello,I need a POE cable of 40 meters between the 1310 bridge and the power injector.I found this reference: AIR-CAB100DRG6-F.It's OK for a 1310?Thanks,
Hi, Are there anybody here that have suceeded in upgrading a 1231G with the firmware from the controller version 4.1.185 (ap sw 12.4(3g)ja2) ????Best regards Henrik
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 10-26-2026 08:39 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM |
| User | Count |
|---|---|
| 5 | |
| 4 | |
| 1 | |
| 1 | |
| 1 |