Wireless

Hi,is there a way that a/b/g cardbus client will work on HP ipaq 5450?There is no driver on cisco software downloads exept for XP and W2000.tnx, bye F.

I am running 12.04 (non IOS OS) and can not find where I would enable or setup WPA. Am I just overlooking this or do I need to install the Cisco IOS on the AP in order to take advantage of WPA?Thanks!

Folks, If i have 1100 and 1200 series cisco access points at my location with G radios in them. How does the fall back work when B cards try to access these access points. Do the # of channels reduce, and what about the overlapping channels? a...

Folks, I have installed about 10 access-points in a company. Everything seems to be working fine, except fast roaming. I had a question about overlapping channels. Since the access-points have G radios, i presume that you can have 8 overla...

Is there configuration example on CCO for EAP-FAST(for ACS, Client and AP)

I am hoping someone can provide information or suggestions for how to migrate 1800+ 350 APs running VxWorks to IOS.There has got to be something other than the conversion tool, one at a time method.Any help is greatly appreciated.

Hello,I'd like to know if, when we set up multiple SSIDs (a, b, c, d, etc....), users from SSID "a" can see users from SSID "b" on the WLAN, etc...Thanks,Eric

I am trying to setup PEAP for our WLAN. I have a Win2k server SP4 and ACS 3.2(1). In the EAP configuration >> PEAP >> I select "Allow EAP-MSChapv2 and EAP-GTC" and "Allow MS-Chap Version 1 Authentication and MS-CHAP Version 2" >> I hit submit and I ...

I am trying to set up multiple VLANs on my 1230g APs. I have successfully configured the AP so that depending on the ssid I use I associate to one VLAN or the other (ssid test to VLAN 10 and ssid test1 to VLAN 20). The problem is I only get network...

I have both the Linksys WET54G and WUSB54G. Both can connect no problem to the Aironet 1200 w/o WEP.Enable WEP, and neither will work. Am I wasting my time trying to get it to work? If so, what is the best alternative for a Wireless 802.11g workgroup...

Hi everyone,I have a issue when I try to connect a application in my network environment.We have some stations with wireless connection (802.11g), clients in a 1100 Access Points, and only these stations try to connect in a application, thats runs ba...

Using Eap, IAS server. clients drop connection then cannot re-connect unless pc rebootedalso have another ap can i roam with non cisco clients?

Hey Group,Is it true that for all types of wireless cards (USB/PCMCIA), be it 802.11a, 802.11b & 802.11g, that they could only reach for a maximum distance of 100m?Is there any way you can increase / extend the range?Thanks so much for your help,Lee

Have been advised to buy Cisco 1200 APs for wireless implementation as I've been told they offer better security features than (for example) a cheaper D-LinkAm also being told that I need to buy Cisco wireless cards for my laptops to be able to use /...

The WAP only does 802.11b. I would like to be able to use 802.11a. How do I configure the WAP to do 802.11a? my current software version: 12.2(11)JA1 Thanks.