Wireless

Hi. I have a 1200 AP running C1200 Software (C1200-K9W7-M), Version 12.2(11)JA1. I am unable to get 802.11a working, but .b on same device does.A Show Controllers tells me this:interface Dot11Radio1Radio AIR-CB20A, Address 0001.28bf.1363, BBlock vers...

The association table in VxWorks used to show me the Name and Device Type of the clients connected to the AP. Now that I have upgraded to IOS, I just get dashes in those columns. Is there something I need to turn on? Thanks.

in the web express setup of the cisco ios for the ap1120b i chang dhcp to static ip and input an ip, subnet mask, and gateway. then apply. i am unable to get to device any more, cant even ping the address that i gave it. i followed the directions fro...

Is it possible to have the system log to auto download using a time schedule into a server..Could someone help me on this?

Hello, i have a small bussiness (6 pc) and i bought a AP1100 and wireless nic for each pc,so far so good, the thing is i live about 300 ft away from my ofice and i want to connect my home pc to the bussiness-network, what i need to acomplish this? sh...

Hi,Could someone possibly take 1-2 original screen shots of rogue AP detection from WLSE engine? No longer have access to one, would greatly appreaciate it. kanclirz@makesecure.com if you can help.Thanks.

Question 1: I just finished converting a large number of AP350s and AP1200s from VxWorks to IOS. I noticed that the 350 APs got firmware version 12.2(13) and the 1200 APs got 12.2(11). Why does the convertion apply two different versions of firmware?...

Hi. I have just upgraded my 1200AP to IOS Version 12.2(11)JA1. I am using LEAP with MAC address auth in the ACS (version 3.0). I cannot get onto LAN though. Error on ACS failed auth report says 'User Access Filtered' even though the MAC of the card i...

HelloI have tried to connect two devices: SMC2655W v2 and the Cisco AiroNet AP352. The Cisco device is set to non-root client with 12.03T VxWorks Software. This does not seems to work. When the client is the SMC device it connects to the AiroNet AP b...

An ap can serve to clients a differents rate speeds simultaneously ?

I'm working with the new WLSE 2.5, and was quite pumped to start playing with all the new tools under the Radio Manager section of the tool. The wind is starting to leave my sails, unfortunately. I'm just getting into this, but it looks like these to...

Can someone explain the meaning of the optional settings on data rates for BR350? (ex...yes,no,basic) I assume these meanyes=requiredno=do not operate at selected data ratebasic=optionalIs this correct?

Hello,I don't understand why after upgrading with c1100-k9w7-tar.122-13.JA1 firmware, I still have in web administration interface, "Radio0-802.11B" settings.Does this firmware was not supposed to be 802.11G ?