Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

Hello,I have deployed a vWLC 8.2(192.168.50.100) with vlan id 0 in Vmware Workstation . After creating a virtual interface(192.168.51.10) in vWLC, I am unable to ping its gateway(192.168.51.1) in switch. I have given bridged connection in Host PC and...

VamsiKrishna by Frequent Visitor
  • 1268 Views
  • 2 replies
  • 0 Helpful votes

ModelAIR-CT5508-K9Software Version8.5.140.0i have the logs below on the WLC which are concerning. Is this a replay attack? or something else. There is load balancing on the 4900M switch across the four ports. *spamApTask6:   %LWAPP-3-REPLAY_ERR: spam...

dazza007 by Level 2
  • 7826 Views
  • 1 replies
  • 0 Helpful votes

We have Cisco 3650 switch which is acting as wireless controller. The IOS version of 3650 is 16.3.9. Cisco 2802 is version on firmware version  8.5.131.0. We configured switch as wireless mobility controller but none of the APs are registering to swi...

serenjek by Visitor
  • 3801 Views
  • 11 replies
  • 0 Helpful votes

I have been using 4 CAP3602s with a WLC 2500 for about a year now, and when I came in on 1/30/20 all 4 of them were blinking green and not connected to the WLC. I was able to get one to rejoin by rebooting it, but the other 3 are all not joining. Her...

r3kr4p by Frequent Visitor
  • 2089 Views
  • 10 replies
  • 0 Helpful votes

Dear All,we still have some 500 Cisco 2700 APs up and running (EoS for this model was April 2019 and End of SW Maintenance is April 2020). Our WLC platform: 8540/3504 with AireOS Rel. 8.5.151.0. Will 8.10 be the last AireOS to support this model ? Wh...

I have an MR55 in a low interference location (home) that isn't giving as good coverage as I'd hope for. I have tried increasing the radio power on both bands, I tried the 5GHz first as I'm not really interested in 2.4GHz apart from a printer...On th...

CMR by Meraki Community All-Star
  • 8934 Views
  • 9 replies
  • 0 Helpful votes

HI there, I am wondering if the new MR45 and Mr55 are running with limited power means 802.3af like the old APs?of course with limitation in the amount of enabled radios and MIMO but at least run to ease transformation of large scale.

huber by Level 2
  • 5283 Views
  • 5 replies
  • 0 Helpful votes

Hello, Could you please tell me how to do and stop the client debug, on a Cisco 5520 WLC ?If we type > debug client <macaddr>How can we show the client debug log ?When we have finished the debug, how to stop it ? Thanks by advance. 

Clem58 by Level 6
  • 30341 Views
  • 6 replies
  • 0 Helpful votes

Hi Team, We are getting DTX error messages in the access points and due to this  the clients performance was bad and disconnection happening across the wireless..  I found some bug but which is not having any fix, Can someone help on this please..  C...

AK002 by Level 5
  • 3361 Views
  • 5 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card