cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
528
Views
0
Helpful
4
Replies

Can't register a AP 1231 on a 2504 WLC controller.

Hi

WLC shows the next error.

AP with  MAC 00:1e:13:10:40:59 (AIR-AP1231G-E-K9    ) is unknown.

I updated the AP to lightweighd firmware using upgrade tool. But upgrade tool generate the csv files empty so I had no idead about Hash key, so I reseted the APs to default values.

WLC still doesn't register them.

How Can I register the APs?

Thank you.

The version of the WLC is 7.3.101.0

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions

The 1231 AP is not supported on WLC version 7.3. Please refer to the 7.3 release notes. The last support for the 1231 AP is 7.0.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn73.html#wp976967

Sent from Cisco Technical Support iPad App

View solution in original post

4 REPLIES 4
Scott Fella
Hall of Fame Guru

Have you looked at this document.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

The 1231 AP is not supported on WLC version 7.3. Please refer to the 7.3 release notes. The last support for the 1231 AP is 7.0.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn73.html#wp976967

Sent from Cisco Technical Support iPad App

Yes your right. I've downupgraded the WLC to 7.0.240.0 and now the APs are registered properly.

Thank you.

Glad you got it working.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Create
Recognize Your Peers
Content for Community-Ad