04-29-2013 03:08 AM - edited 07-03-2021 11:59 PM
Hi
WLC shows the next error.
AP with MAC 00:1e:13:10:40:59 (AIR-AP1231G-E-K9 ) is unknown.
I updated the AP to lightweighd firmware using upgrade tool. But upgrade tool generate the csv files empty so I had no idead about Hash key, so I reseted the APs to default values.
WLC still doesn't register them.
How Can I register the APs?
Thank you.
The version of the WLC is 7.3.101.0
Thank you
Solved! Go to Solution.
04-29-2013 06:28 AM
The 1231 AP is not supported on WLC version 7.3. Please refer to the 7.3 release notes. The last support for the 1231 AP is 7.0.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn73.html#wp976967
Sent from Cisco Technical Support iPad App
04-29-2013 04:50 AM
Have you looked at this document.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml
Sent from Cisco Technical Support iPhone App
04-29-2013 06:28 AM
The 1231 AP is not supported on WLC version 7.3. Please refer to the 7.3 release notes. The last support for the 1231 AP is 7.0.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn73.html#wp976967
Sent from Cisco Technical Support iPad App
04-29-2013 08:06 AM
Yes your right. I've downupgraded the WLC to 7.0.240.0 and now the APs are registered properly.
Thank you.
04-29-2013 09:07 AM
Glad you got it working.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide