05-28-2014 02:17 PM - edited 07-05-2021 12:54 AM
Hi,
I have Cisco WLC 2504 whose management ip address is 192.168.1.100 and port 1, when I am connecting through port 1 directly I can access WLC GUI but when I am connecting this port of WLC to switch (with just ip address in vlan 1 192.168.1.123) and AP (192.168.1.2XX) and try to access the WLC GUI the page is not displaying although I can ping the controller.
version of Wireless LAN Controller Software-7.6.120.0(ED)
Thanks.
Solved! Go to Solution.
06-03-2014 03:55 AM
Hi,
If you want to access wlc via wireless then Please use these commands:
Via GUI:
Management > Mgmt Via Wireless and enable this check box and apply.
Via CLI:
config network mgmt-via-wireless enable.
Regards
Dont forget to rate helpful posts
05-30-2014 07:45 PM
Hi
When a PC is connected to the switch, you can you ping 192.168.1.100?
If you are connected via Wi-Fi, you will need to enable Management over wireless, otherwise you cannot manage the controller.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_security_sol.html#wp1880985
If still not working, please provide the switch configuration in an attachment and show interface summary from the controller.
Best Regards.
Christian
06-05-2014 06:12 AM
Just to complete this discussion, access is not possible if you are connected to an OEAP.
06-03-2014 03:55 AM
Hi,
If you want to access wlc via wireless then Please use these commands:
Via GUI:
Management > Mgmt Via Wireless and enable this check box and apply.
Via CLI:
config network mgmt-via-wireless enable.
Regards
Dont forget to rate helpful posts
07-07-2014 01:29 PM
Thanks all,
After enabling Management via Wireless it started working.
Thanks again...!
07-07-2014 01:48 PM
Please don't forget to rate useful posts.
09-01-2020 08:37 AM
Hi:
I did your recommendation but still not working for me. What else can be done?
09-01-2020 02:27 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide