cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1527
Views
0
Helpful
2
Replies

Cisco 1832i firmware ap1g4 (8.1.143.0) lightweight to autonomous upgrade

Anony
Beginner
Beginner

Hi,

I am looking for a way how to upgrade subjected firmware from the lightweight to autonomous (ME - Mobility Express),

 

I have Cisco Access Point Air-AP1832i-e-k9, how to download running firmware and upload new one. AP is not allowing me to go into "conf t" mode.

 

Please help.

Please rate helpful, thanks.
2 Replies 2

patoberli
VIP Advisor VIP Advisor
VIP Advisor

To download software you need to have a valid contract. Then you can download the ME image for this AP and do the lightweight to ME conversion: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_01100.html

Sandeep Choudhary
VIP Mentor VIP Mentor
VIP Mentor

As @patoberli mentioned, you need a valid service contract to download software from cisco.

 

Or you can ask your supplier to provide the ME software

 

How to convert : https://semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap/

 

Regards

Dont forget to rate helpful posts

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers