I am looking for a way how to upgrade subjected firmware from the lightweight to autonomous (ME - Mobility Express),
I have Cisco Access Point Air-AP1832i-e-k9, how to download running firmware and upload new one. AP is not allowing me to go into "conf t" mode.
To download software you need to have a valid contract. Then you can download the ME image for this AP and do the lightweight to ME conversion: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_01100.html
As @patoberli mentioned, you need a valid service contract to download software from cisco.
Or you can ask your supplier to provide the ME software
How to convert : https://semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap/
Dont forget to rate helpful posts
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: