03-12-2018 10:21 AM - edited 07-05-2021 08:22 AM
Hello! I got new cisco 3850 yestarday and i should configure this device as wireless controller. I read some manuals and in each manuals was mantioned that for configuration Cisco 3850 as wireless controller i should use this command "wireless mobility controller". But my cisco don't understand this command and dont have association any commands with word wireless? What i done wrong? Device has active IP Base license.
Solved! Go to Solution.
03-13-2018 03:12 AM
03-13-2018 04:39 PM
Hi,
You should be fine downgrading to 3.6.6E as long as your switch supports that version. Follow the downgrade to 3.x steps in the release notes at the following link:
To find the difference between 16.6.3 and 3.6.6E, use the Cisco Feature Navigator:
http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp?dtid=osscdc000283
Thanks
John
03-12-2018 12:59 PM
03-12-2018 11:38 PM
It has :
Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9 -M), Version 16.6.1, RELEASE SOFTWARE (fc2)
Compiled Sat 22-Jul-17 03:00 by mcpre
03-13-2018 03:12 AM
03-13-2018 04:16 AM
03-13-2018 04:39 PM
Hi,
You should be fine downgrading to 3.6.6E as long as your switch supports that version. Follow the downgrade to 3.x steps in the release notes at the following link:
To find the difference between 16.6.3 and 3.6.6E, use the Cisco Feature Navigator:
http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp?dtid=osscdc000283
Thanks
John
04-22-2022 07:54 AM
Hey John.
Thanks for the info - can confirm that I upgraded from 3.xxx to 16.12 and had this issue.
Downgraded too 16.3.8 and works a treat.
Connor
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide