cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
201
Views
15
Helpful
6
Replies
Highlighted
Participant

Cisco 5520 and smart licence

Hello ,

 

I hope you are doing well.

Could you help me please !

 

I would sak you what are the port needed on cicso WLC 5520 to communicate a smart licente (direct access via internet ) and which interface used by cisco WLC 5520  to access a internet ?

 

Best regards

Akram

6 REPLIES 6
Highlighted
VIP Expert

Port 80 and 443 is good enough for smart License using Cisco Cloud.

 

WLC depends on deployment, if you have separate mgmt interface - then I would use that one.

 

here is the guide how it works :

 

https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/8-2/b_Smart_Licensing_Deployment_Guide.html

 

 



BB


*** Rate All Helpful Responses ***

Highlighted

Thank you for your reply,

 

Do you know any commande to test connectivity internet for this page (tools.cisco.com) from WLC 5520.

Highlighted

1. Find the IP of it by doing nslookup tools.cisco.com

2. try to ping that ip from cisco wlc

 

Regards

Dont forget to rate helpful posts

Highlighted

Hello,

Cisco WLC 5520 not support nslookup .

I have another question which interface is used by controller to contact cisco smart licensing ? (Management or SP)

 

Best regards

 

 

Highlighted

suggest to ping from WLC and try telenet to port 443 see it can, from the same network of WLC.



BB


*** Rate All Helpful Responses ***

Highlighted
VIP Mentor

Hi Akram,

 

Controller supports only standard HTTP (TCP 80) and HTTPS (TCP 443) for device registration against SSM.

 

here is the guide for deployment:

 

https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/8-2/b_Smart_Licensing_Deployment_Guide.html

 

Regards

Dont forget to rate helpful posts

Content for Community-Ad