03-18-2011 04:32 PM - edited 07-03-2021 07:58 PM
Hello,
I have a question for you guys. I set up my cisco 861w in order to get access to Internet at home. Everything was good except that I can't tune it in order to work on wireless N. Can you take a look at my attached configuration in order to make my network to function at wireless N speed.
Thank you in advance.
Lazar Mihail
Solved! Go to Solution.
03-18-2011 09:43 PM
Hi,
The configuration that you have posted is doing WPA Auth and TKIP as the encryption... i have attacted the modified config.. use this and this will give u N speeds..
Lemme know how this helps..
Regards
Surendra
03-18-2011 09:40 PM
Hey Lazzar!!
Nice to see you back..
To Get N speeds here are the few conditions..
1>> The SSID should be configured for OPEN AUTH with NO ENCRYPTION with all MCS ENABLED and WMM ENABLED.
OR
2>> The SSID should be configured for WPA-2 Auth with AES as the ENCRYPTION with all MCS ENABLED and WMM ENABLED.
Make sure we have this configutration right!!
Lemme know if this answered your question!!
Regards
Surendra
03-18-2011 09:43 PM
03-19-2011 01:12 AM
Perfect,
I made the changes and now is working at wireless N speed. Thank you very much Surendra for your support.
Cheers,
Lazar Mihail
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide