cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1090
Views
0
Helpful
2
Replies

Compatibility for 3802i WAP

Jagan1976
Level 1
Level 1

Hi guys,

I have a 2500 WLC running on 8.2.166.0. Currently I have 3702i WAPs.

I am getting new 3802i WAPs.

Can this work with this firmware?

The compatibility matrix for 8.2.166.0 version shows the below list of supported hardware. 

It says 3800 is supported, that means the whole series correct?

 

Lightweight APs: 1040, 1140, 1260, 1600, 1700, 1810 OEAP, 1810W, 1830, 1850, 2600, 2700,
2800, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 3800, 600 OEAP, 700,
700W, AP802, AP803, ASA5506W-AP702

 

Source: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.pdf

1 Accepted Solution

Accepted Solutions

superego
Level 1
Level 1

Yes it will work.

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82mr6.html

 

Please note that WLC IOS you're using is a deferred release.  Upgrade to a stable code.

View solution in original post

2 Replies 2

superego
Level 1
Level 1

Yes it will work.

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82mr6.html

 

Please note that WLC IOS you're using is a deferred release.  Upgrade to a stable code.

Leo Laohoo
Hall of Fame
Hall of Fame
I'd recommend you upgrade the firmware of the controller to the latest 8.5 version.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card