- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2019 07:55 AM - edited 07-05-2021 10:03 AM
Hi guys,
I have a 2500 WLC running on 8.2.166.0. Currently I have 3702i WAPs.
I am getting new 3802i WAPs.
Can this work with this firmware?
The compatibility matrix for 8.2.166.0 version shows the below list of supported hardware.
It says 3800 is supported, that means the whole series correct?
Lightweight APs: 1040, 1140, 1260, 1600, 1700, 1810 OEAP, 1810W, 1830, 1850, 2600, 2700,
2800, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 3800, 600 OEAP, 700,
700W, AP802, AP803, ASA5506W-AP702
Source: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.pdf
Solved! Go to Solution.
- Labels:
-
Wireless LAN Controller
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2019 08:01 AM
Yes it will work.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82mr6.html
Please note that WLC IOS you're using is a deferred release. Upgrade to a stable code.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2019 08:01 AM
Yes it will work.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82mr6.html
Please note that WLC IOS you're using is a deferred release. Upgrade to a stable code.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2019 04:25 PM
