cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2431
Views
5
Helpful
6
Replies

Compatibilty for AIR-ANT2451NV-R=

lnoriega64
Level 1
Level 1

Hi,

A customer needs (5) AIR-AP1252AG-A-K9 access points and is asking for the AIR-ANT2451NV-R= compatibility. I get an error when trying to add the antena in Dynamic Configurator and CCW also.

The customers needs 802.11 a/g/n  service. Are both products compatible?

Thank you

1 Accepted Solution

Accepted Solutions

Stephen Rodriguez
Cisco Employee
Cisco Employee

From looking at:

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf

It would appear that they are compateble.  What error are you getting in the DCT?

Cheers,

Steve

Please remember to rate helpful posts

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

6 Replies 6

Stephen Rodriguez
Cisco Employee
Cisco Employee

From looking at:

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf

It would appear that they are compateble.  What error are you getting in the DCT?

Cheers,

Steve

Please remember to rate helpful posts

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

The error message is:

Cisco Configuration Tool

Product Not Found

The item AIR-ANT2451NV-R= you have entered is not a valid option for this model.  Please check your entry and try again.

The configuration tool link is:

https://apps.cisco.com/qtc/config/jsp/configureHome.jsp

Maybe you can try to see if you get same error. The product I'm trying to configure is AIR-AP1252AG-A-K9.

Thanks

Luis

Leo Laohoo
Hall of Fame
Hall of Fame

ANT2451NV is compatible with the 1252 ... as long as you have both radio modules.

I Think this product number includes both radios, or not?

AIR-AP1252AG-A-K9

802.11a/g/n-d2.0 2.4/5-GHz Mod Auto AP; 6 RP-TNC; FCC

Thank you for your comments.

Luis

that part AIR-AP-1252AG-A-K9, is for both radios.  I'm having issues with my account, so I am not able to access the DCT, but I would try the part number as AIR-ANT2451NV-R, leave off the "="

Cheers,

Steve

Please remember to rate helpful posts

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

I now have the response from Cisco Support:

"AIR-ANT2451NV-R= is not included on the antenna options though for AIR-AP1252AG-A-K9 configuration on DCT. It is supported on AP 1252AG with Cisco IOS Release 12.4(21a)JA1 based on the document that i sent you. AIR-ANT2451NV-R= has to be ordered separately.

Please check the links below for addional ingormation.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/ps8382/product_data_sheet0900aecd806b7c5c.html
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0apcfg.html"

I think that's good enough for me.

Thank you all.

Luis

Review Cisco Networking for a $25 gift card