04-03-2013 12:50 PM - edited 07-03-2021 11:50 PM
Does anyone have a good way to connect two parking lots with wireless coverage? I have a parking lot approximately 3/4 of a mile from the main building where I am being asked to put a single AP up for a hot spot. Does anyone know a good way to set this up without running any network fiber out to the parking lot? There is already power in the parking lot to run the lights. Any suggestions would be greatly appreciated!
Solved! Go to Solution.
04-03-2013 01:21 PM
you could bridge across teh 5GHz radio and offer 2.4GHz services.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
04-03-2013 02:01 PM
Well like what was mentioned you can bridge or use mesh. The question is... You have line of sight and or obstructions in the way. Mesh would work but you would need the 1552EU so you can attach a patch to the 5ghz side to reach out that far.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html
If you were to use an AP as a bridge you might have to look at enclosures etc. your best bet to use a bridge is to look at the Cisco Exalt r5005. You would then run an Ethernet connection to a building if possible with an AP or use an outdoor AP like the Cisco 1300 or 1400 which are EOS but you might find them cheap online.
Sent from Cisco Technical Support iPhone App
04-03-2013 01:20 PM
If your solution requres no wires to the APs at the parking lot then use mesh links to the APs.
04-03-2013 01:21 PM
you could bridge across teh 5GHz radio and offer 2.4GHz services.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
04-03-2013 02:01 PM
Well like what was mentioned you can bridge or use mesh. The question is... You have line of sight and or obstructions in the way. Mesh would work but you would need the 1552EU so you can attach a patch to the 5ghz side to reach out that far.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html
If you were to use an AP as a bridge you might have to look at enclosures etc. your best bet to use a bridge is to look at the Cisco Exalt r5005. You would then run an Ethernet connection to a building if possible with an AP or use an outdoor AP like the Cisco 1300 or 1400 which are EOS but you might find them cheap online.
Sent from Cisco Technical Support iPhone App
04-08-2013 09:54 PM
Thank you all for helping me find some answers to this question. It was very helpful to me!
04-09-2013 04:50 AM
No problem.
Sent from Cisco Technical Support iPhone App
04-23-2013 07:31 AM
Hello Shannon,
As per your query i can suggest you-
Please bridge across the 5GHz radio and 2.4GHz radio to connect two parking lots with wireless coverage services.
Hope this will work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide