cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
688
Views
0
Helpful
1
Replies

dot1x on mac laptops

bluesea2010
Level 7
Level 7

Hi,
EAP-PEAP -MscHAPV2,

for server authentication - certificate issued from public CA assigned .

When connecting MAC prompting for username and password . Once supplied it is asking "Do you trust the certificate ......."

The moment I click the trust certificate ,it just disappears and not connecting tto the wireless

its happening all mac laptop, but Iphones are connecting 

Thanks

 

1 Reply 1

Rich R
VIP
VIP

What are you trying to connect to?
What WLC model?
What AP model?
What version of software?
If it's only affecting MAC it's more likely to be a MacOS bug - have you fully updated the MACs and contacted Apple support?

------------------------------
Please click Helpful if this post helped you and Accept as Solution if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
AP supported channel lookup: https://apchannels.cisco.com/
Review Cisco Networking for a $25 gift card