Duplex mismatch with a AIR-LAP1042 in bridge mode

[mikjak1271]

A message keeps comming in the syslog,

May 14 08:10:41 192.168.1.20 wlc_vackstanas: *CDP Main: May 14 06:24:09.1

71: #LWAPP-4-AP_DUPLEX_MISMATCH: spam_api.c:6165 Duplex mismatch discover

ed on GigabitEthernet0 (not full duplex), with APccef.488f.7ccd-Gammelgar

d GigabitEthernet0.1 (full duplex) for AP APccef.48c2.644d-Salvia

host

=192.168.1.20 | sourcetype=syslog | source=udp:514 | CiscoSysMsg= #LWAPP-4-AP_DUPLEX_MISMATCH:

Can't find any wrong with the switchports and AP's that can result in Duplex mismatch.

The only differense I can find is the AP that is in all duplex missm. log's is used for other Mesh AP's to connect to.

Any suggestions would be great.

Thanks

Mikael

[Leo Laohoo]

Don't hard-code the speed and duplex setting.  Let them auto-negotiate.

[Scott Fella]

Make sure your not setting the speed or the duplex. Let the switch and the ap auto negotiate.

Sent from Cisco Technical Support iPhone App

[Leo Laohoo]

LOL, Scott.

[Scott Fella]

We are like a broken record:)

Sent from Cisco Technical Support iPhone App

[mikjak1271]

Thanks for quick response

All ports are allready set to Auto

[Scott Fella]

Check the patch cable?

Sent from Cisco Technical Support iPhone App

[Leo Laohoo]

Post the output to the commands:

1.  AP:  sh interface G0;

2.  Switch:  sh interface

3.  Switch:  sh controller e

[mikjak1271]

I'm not on site.

I'll post later

Thanks

[Leo Laohoo]

Okey dokey.

Sent from Cisco Technical Support Nintendo App