10-07-2023 12:26 AM
Hi,
I have a Cisco AIR 1131 access point(firmware is c1130-rcvk9w8-tar.124-10b.JA3), when i type cli command : sh ip int br
the following syntax appears :
FastEthernet0/0 is up, line protocol is down!
Please help me fix this error.
Thanks in advance.
10-07-2023 12:32 AM - edited 10-07-2023 12:32 AM
Hello @lamrihamza
We need more information to help you.
Do you configure IP add on that interface ? IP address on the same subnet with the other interface facing it ?
10-07-2023 03:01 AM
hello
Yes, I do. I've configured the interface with the same subnet as the interface it's facing, but the protocol line is still down.
Thank you for help
10-07-2023 03:09 AM
Please share fa0/0 configuration.
10-07-2023 04:48 AM
hi
Interface IP-Address OK? Method Status Protocol
FastEthernet0 10.X.X.244 YES other up down
thanks
10-07-2023 06:33 AM
But that does not answer my questions - refer to my post below.
We need to see the full output and running config for the switch and AP ports to have any chance of helping you.
10-07-2023 03:15 AM
- The access point may be broken , what is the status of the LED indicator , on top of the AP ?
M.
10-07-2023 04:51 AM
Hi
The LED indicator is red for 2 seconds and green for 1 second
Thanks
10-07-2023 05:33 AM
is this issue new installation ? or working one failed ?
what model of switch other side ?
what is the distance between AP and Switch ?
have you taken the AP near the switch and tested ?
10-07-2023 03:54 AM
Provide "show int fast0/0" and "show run int fast0/0" (I presume that is the switch port because the AP does not have a f0/0 interface)
And the same for the AP port: "show int fast0"
What controller model and software version are you using?
Note that that AP model is very old and end of support!
10-07-2023 05:54 PM
If this AP is meant to be used without a controller, then the software will need to be converted to autonomous IOS.
With CAPWAP RCV firmware, there is very limited function and/or "configuration" that can be done.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide