cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1128
Views
0
Helpful
3
Replies

FlexConnect APs and Central switching

cloudlogics
Level 2
Level 2

Hi All,

 

I have a query. Can an AP running in FlexConnect mode run a mix of SSIDs e.g. Corp1 SSID should be locally switched while Corp2 SSID is centrally switched? My understanding is that we can't mix switching either all SSIDs are locally switched (FlexConnect) or they are all centrally switched (CAPWAP tunnel). To achieve a mix we will require two APs one running Flexconnect (local switching) and other running Central switching? 

Thanks

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

As per my understanding and deployment, you have both in WLC, but we make different AP Groups each mode.

 

Some good information can be find here :

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/ch7_HREA.html

 

BB

=====️ Preenayamo Vasudevam ️=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Rich R
VIP
VIP

You can mix and match as you wish - we do. 

We have some SSID which are centrally switched and some which are locally switched on the APs.

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

JPavonM
VIP Alumni
VIP Alumni

Yes this is perfectly possible as working as a Flexconnect AP it doesn't mean all traffic will be locally forwarded.

Look at these guides:

https://community.cisco.com/t5/wireless-mobility-documents/wireless-lan-flexconnect-configuration-example/ta-p/3112924

http://www.labminutes.com/wl0034_wlc_flexconnect_fundamental_1

HTH

- Jesus

Review Cisco Networking for a $25 gift card