I know this has been answered but seems to be a good few years now. I also can't find any supporting documentation to say otherwise.
IntraWLC Roaming on FlexConnect SSID. If you roam between APs that have different VLANs configured for the same SSID I am assuming this is not seamless and transparent to end user? End user would have to pick up new address and go through DHCP process again and affect traffic flow?
It was answered here - https://community.cisco.com/t5/wireless-and-mobility/l3-roam-using-flex-connect/m-p/3006162#M88619
Just seeing if this is the same or if anyone knows differently?
Solved! Go to Solution.
Thanks both, I'm completely against it btw from a design perspecitve. The controllers are local to the site and this would be for Corporate traffic. The only concern I had was with tunnelling everything back to the WLC and that becoming a bottleneck (9800 Controller) but the throughput is upgradeable with a software license if that becomes an issue.
For the Central Switching - Am I right in thinking there are no issues with using one large subnet for the company SSID in Central Switching. I obviously want things like collaboration apps to work between devices on wireless and also between wireless / wired. Does the WLC proxy / deal wth ARP etc from end devices..?