cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
651
Views
4
Helpful
4
Replies
nhan.duong
Beginner

H-REAP

When I configuring APs with H-REAP with multiple VLANs. Do I have to trunk the APs LAN interface and Switchport?

4 REPLIES 4
jeromehenry_2
Participant

Yes, ports are in trunk mode.

Hope it helps

Jerome

let me take that one step further. You can use a trunk or access ports for AP connectivity. The LWAPP tunnel will cross over either. I have deployed these over a MPLS network over switch port.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

whatv vlans we should allow in trunk port ?

in my scenario, we have MPLS network in between.

Pls. explain if possible. Thanks !

For an H-REAP AP, you need to trunk only the vlan your ap management ip address is on and any of your vlans you wish to put wireless users on (local switching). If you are centrally switching any SSID's, you do not need to add those vlans to the trunk port.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Create
Recognize Your Peers
Content for Community-Ad