how to enable 100mbps speed on cisco wlc 2504 with 3600 ap

[veeramani Gopal]

HI

i have cisco wlc 2504 connected with cisco 3600 ap,now the customer required n bandwidth speed ,but in wlc am not able to enable n bandwidth for ssid.

in radio policy of ssid also n bandwitdh is not showing,only this bandwidth showing a/g,g,b/g, and all

Please help on this on urgent basis

[bashir.rabbani]

you need to go to wireless>802.11a/n>High Throughput (802.11n) and enable 11n mode. Also do this under radio 802.11b/g/n.

Regards

Bashirhow to enable 100mbps speed on cisco wlc 2504 with 3600 ap

[rdvorak]

WLAN must be open or with AES encryption to get 802.11n rates

[veeramani Gopal]

i did both the things after that also am not able to do,

currently am having

(7.2.103.0) this version ios whether do i need to upgrade this tolatest one ?

Please help on urgent basis

Veeramani.G

[bashir.rabbani · Accepted solution]

Yes the data rate will not exceed 54Mbps when WEP or TKIP encryption is configured as unicast key. radio policy of ssid will not show N as a radio policy you need to enable it globaly. is your client N capable? you do not need to upgrade to get N speed on your network.

[veeramani Gopal]

ok let me upgrade ,i will get back to u

[Scott Fella]

Just to add... Your client must support 802.11N. There is no need to upgrade your WLC because that version is capable of 802.11N standard. Like mentioned, this is what you need in order to see 144mbps on the 2.4ghz an up to 300mbps on the 5ghz.

Open or wpa2/aes

WMM enabled on the WLAN SSID

40 MHz channel width on the 5ghz DCA

Sent from Cisco Technical Support iPhone App

[Scott Fella · Accepted solution]

Here is a doc

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a3443f.shtml

Sent from Cisco Technical Support iPhone App

[veeramani Gopal]

Hi issue now solved after upgrade and after changing country code

Thanks