10-13-2006 11:23 AM - edited 07-03-2021 01:05 PM
After installing the WCS 4.0 Heatmap client count (per AP) is inaccurate.
Even after clicking the refresh button. After drilling down by clicking on the AP while in client display mode DOES show a correct AP count.
Is this problem unique to our particular installation? Has anyone else observed this discrepancy in WCS 4.x which was supposed to have this fixed in previous versions according to Cisco Bug/Defect list?
CSCsd91565 - B/G Clients in WCS showing on summary page but not on maps
Steps to reproduce:
This takes place after clicking on the green bullseye icon under "View Filters" and selecting "users" as the method of display.
For reference, the WCS/WLC configuration is as follows:
=======================================================
WCS Version 4.0.81.0 Base+Location
Windows 2003 with WCS running as a service.
Multi-processor Xeon, 8 GB of RAM.
Two 4404 WLC controllers v4.0.179.8
Solved! Go to Solution.
10-13-2006 11:48 AM
FWIW I can see this too. I never use that view, so I am not sure if it has always been a problem. I'm running 4.0.81.0 and 4.0.179.8.
-Eric
10-16-2006 10:23 AM
We see the same issue. We're waiting for the next release to see if it is fixed or if we need to open a TAC case.
10-13-2006 11:48 AM
FWIW I can see this too. I never use that view, so I am not sure if it has always been a problem. I'm running 4.0.81.0 and 4.0.179.8.
-Eric
10-16-2006 10:23 AM
We see the same issue. We're waiting for the next release to see if it is fixed or if we need to open a TAC case.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide