Integrate 1250 to Active Directory

[edwin.sanjoto]

Dear fellows,

I have installed 4 unit Cisco Aironet 1250 acting as Autonomous AP each.

I want to integrate these AP to Windows Active Directory for authentication level.

When I read configuration guide on Cisco Aironet, they must be authenticated via RADIUS server.

Is it possible that these AP directly authenticated to Active Directory via LDAP protocol?

Is there any supporting documents?

Thank you.

Edwin

[Surendra BG]

Hi Edwin,

AP cannot directly integrate with Active Directory via LDAP protocol.. this needs the ACS or IAS which uses RADIUS.

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

[Peter Nugent]

No you will need to add them as RADIUS clients to integrate them to AD

[edwin.sanjoto]

Guys,

So, when the APs have been registered as RADIUS client, how do the APs registered to the Active Directory?

Is there any supporting documents?

Thanks.

Edwin

[Surendra BG]

RADIUS will take care of the communication between the AP and the AD... here is the link which explains in depth..

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap13-radius-tacacs.html

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull