05-10-2024 02:24 AM
Hi All,
My question is very simple... after the EOL of the wireless systems based on AireOS software (WLC 5508 & 5520) is there a minimum inter-operability release between these old systems and the new FireOS (WLC 9800 series)?
I need to guarantee seamless roaming (fast roaming) between "old" and new.
Thanks,
Solved! Go to Solution.
05-10-2024 02:46 AM
05-10-2024 02:46 AM
05-10-2024 06:56 AM
FYI, more info on IRCM: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/b_c9800_wireless_controller-aireos_ircm_dg.html
For seamless L3 roaming:
Cisco IOS XE code: Release 16.12.5 or 17.3.3 and above.
AireOS code: Release 8.5.176 IRCM or 8.10.151 and above
I have AireOS 8.10.190.x in a mobility group with IOS 17.9.4a.
05-10-2024 09:20 AM
Always refer to TAC recommended link below.
For 5520 currently 8.10.190.0
For 5508 latest IRCM release is 8.5.182.108 (link below)
Note 9800 series WLCs run IOS-XE not FireOS!
> I need to guarantee seamless roaming (fast roaming) between "old" and new.
Refer to the links already provided and take note of the IRCM restrictions and limitations.
05-13-2024 11:45 PM - edited 05-14-2024 01:51 AM
Hi,
I want to better describe my problem.
The environment is the metro railway one where Interl-WLC L2 Roaming is performed between Client and AP.
The following devices are currently installed:
WLC 1 and 2
AIR-CTW5508-K9 |
8.0.152.12 |
WLC 3 and 4
AIR-CT5520-K9 |
8.5.161.9 |
AP (first batch)
AIR-LAP1242AG-9-K9 |
8.0.152.12 |
AP (second batch)
AIR-AP1852E-E-K9 |
8.5.161.9 |
Client
MARC C3251 |
15.0(1) M9 |
WMIC C3201-K9W7-M |
12.4(25d) JA2 |
The primary goal is to change the Client (which like all the other devices are in EOS), obviously having the least possible impact on everything else.
At the moment studying the Compatibility Matrix I only have this Solution:
Client: Cisco Catalyst IW9167EH-x-WGB (I need railway certificate) (First Cisco IOS XE Release Support Cisco IOS XE Cupertino 17.9.3)
AP:AIR-AP3802E-x-K9 (First Cisco IOS XE Release Support Cisco IOS XE Denali 16.3.1). Instead of 1242AG.
WLC: Controller 9800
In practice I would not only change the AIR-AP1852E-E-K9 APs that support Cisco IOS XE Gibraltar 16.10.1 (First Release)
I will use the Cisco Release IOS XE Cupertino 17.9.3 for all devices.
I know the impact is big but I don't see any valid alternatives. What do you think?
Thanks,
05-14-2024 01:50 AM
Mostly agree but not with the selected IOS-XE version 17.9.3 (apart from anything else it has a critical security vulnerability) - refer to the TAC recommended link below.
Currently 17.9.5 is recommended but you could also consider 17.12.3 as there are a number of known issues with 17.9.5
05-15-2024 12:16 AM
Hi,
thanks for the clarification.
05-16-2024 10:27 AM
Hi, I have another question about this topic...
Can you confirm that the WGB Client needs to be compatible about IOS with the AP IOS ?
My doubt is.. in order for a wgb client to be compatible with the rest of the installed APs, I must rightly check if the client is compatible with the IOS version of wlc and AP?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide