02-27-2023 11:04 PM
I want to check the capacity of os downloaded from wlc from ap.
Is there a command that can be seen like dir flash on cisco ap 9115?
wlc -> 8540
os -> 8.10.171.0
02-27-2023 11:14 PM
- Enable telnet and or ssh from the controller to the access point, then you may be able to execute dir flash: on the access point ,
M.
02-27-2023 11:18 PM
Thanks for the answer, but there is no command called dir itself.
02-27-2023 11:46 PM
- Check command options for show ? and or post available options here :
M.
03-01-2023 08:51 AM
Short answer: no you can not.
AP COS stores the boot image completely differently to IOS in a separate partition. Each image (primary and backup) gets a separate partition.
If you just want to see the size of the image you can look at the downloadable version - eg:
https://software.cisco.com/download/home/286322352/type/286288051/release/15.3.3-JPN1
03-01-2023 09:29 AM
Take a look at this link, don't know if this is what you are trying to obtain from the ap or not.
COS APs do not allow to list all the content of the file system as on unix platforms.
The command "show filesystems"gives a detail of the space usage and distribution on the current partition:
2802#show filesystems Filesystem Size Used Available Use% Mounted on /dev/ubivol/storage 57.5M 364.0K 54.1M 1% /storage 2802#
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide