Lightweight APs Inherit time zone from WLC 9800

[Muhammad Tabish]

Hello,

We want to set all lightweight APs time zone which are registered with 9800 controller.
In AirOS controller we can do this with command "config ap timezone enable use-controller all"

Is there any equivalent command for WLC 9800 or any other workaround?

Thanks

[balaji.bandi]

Not at i know equival i see - you can convert the config below :from airos to ios xe

https://cway.cisco.com/wlc-config-converter/ 

[Rich R · Accepted solution]

What version of software are you using?
According to https://bst.cisco.com/bugsearch/bug/CSCvt73755 it should be possible from 17.6.1 (and I've checked - the command is there)
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-8/config-guide/b_wl_17_8_cg/m_vewlc_hyperlocation_cg.html#Cisco_Task.dita_fad07a39-4320-4c1f-ab02-a727b4fc4510

[Muhammad Tabish]

Shared commands working fine for version 17.7.1 but not for version 17.3.4c

Thanks for your support

[Rich R]

> Shared commands working fine for version 17.7.1 but not for version 17.3.4c

Because as I explained above it was only introduced in 17.6.1 so it's not supposed to work in 17.3.4c !