06-14-2011 08:37 AM - edited 07-03-2021 08:19 PM
Hi,
I wonder if some else has seen this:
I have a CAPWAP environment with 7.0.98 version Controllers and 1252 and 1262 APs and using ACS 5.1 for AAA services. 802.11n on a/b/g is enabled.
Also transitioning from EAP-FAST to PEAP, have two different SSIDs for this but noticed that only people using EAP-FAST and Visitors (using Web Auth) are connecting at .11n. Nobody using PEAP connects .11n. I tried with a Windows laptop myself and connected immendiately at .11n when using EAP-FAST but only at .11g when using PEAP.
Anybody with similar experiences that could shed some light on this?
Thanks in advance
Solved! Go to Solution.
06-14-2011 08:42 AM
are we using WPA v2 with AES as the encryption?? or OPEN authentication?? with All MCS ratings enabled + WMM enabled.. then only we get N speeds!!
Please check and lemme know!!
Dont forget to rate the usefull posts!!
Regards
Surendra
06-14-2011 08:42 AM
are we using WPA v2 with AES as the encryption?? or OPEN authentication?? with All MCS ratings enabled + WMM enabled.. then only we get N speeds!!
Please check and lemme know!!
Dont forget to rate the usefull posts!!
Regards
Surendra
06-14-2011 09:28 AM
Hi,
I'm using WPA v2/ AES and all MCS rates are enabled. However WMM was not in the SSID using PEAP and that seems to have done the trick. I see PEAP users now connecting at .11n.
Thanks lots for the useful tip!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide