Solved: Re: Please need help for upgrade ME 8.5.131 to ME 8.10.185 a

mohamedsafwat9393 · ‎05-31-2023

I have error wired0 stopped & wired0 started stuck and can't get ip

Please note can configure it full configuration but when get the ethernet cable off and On again it can't back to take ip

Rich R · ‎06-01-2023

Do a factory default reset of the AP using the button, then start again.
If you still see the error(s) attach the full console log from power-on here as a text file.
Do not paste hundreds of lines of logs into the thread.
State the model of AP you're working with.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs

View solution in original post

mohamedsafwat9393 · ‎05-31-2023

New error

Duplicated configuration for "wired"

mohamedsafwat9393 · ‎05-31-2023

Ping on wlc & ap have 80% loss packet

Rich R · ‎06-01-2023

Do a factory default reset of the AP using the button, then start again.
If you still see the error(s) attach the full console log from power-on here as a text file.
Do not paste hundreds of lines of logs into the thread.
State the model of AP you're working with.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs

mohamedsafwat9393 · ‎06-01-2023

I make that and assign ip for CR and Ap the i import the bckp , but my issue after make full configuration and try to move the the ethernet cable to can plug it again, the device not take ip and makes the below

Waiting for ipv4 configuration

Duplicated configuration for wired

Wired0 started & stopped

So that what I faced

Thanks in advance