10-30-2017 11:47 AM - edited 07-05-2021 07:47 AM
Hello,
I am setting up port channels for the first time in a new network.
I am using a cisco WS-C3850-24S switch to uplink our IDF's which are 2960x switches.
My question is if IDF 1 is uplinked on the 3850 on port 5 and the channel port group on the 3850 on port 5 is channel-group 5 mode active. Does uplink on the switch also have to be on channel-group 5?
Or can it be anynumber?
Solved! Go to Solution.
10-30-2017 03:53 PM
Channel group number is locally significant. So it does not need to match at both ends of the link.
HTH
Rasika
*** Pls rate all useful responses ***
10-30-2017 12:11 PM
It can be any number
10-30-2017 03:53 PM
Channel group number is locally significant. So it does not need to match at both ends of the link.
HTH
Rasika
*** Pls rate all useful responses ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide