02-11-2014 06:53 PM - edited 07-05-2021 12:09 AM
Hi all,
Got a query
I have got following command configured under two interfaces connected to WLC distribution ports
gi1/2
qos vlan-based
gi1/3
qos vlan-based
I have a port-channel configured for both gi1/2 and gi1/3
Do I need to configure qos vlan-based under port-channel as well?
Solved! Go to Solution.
02-11-2014 07:21 PM
Typically you just need to define QoS on the physical port and not the port channel.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
02-11-2014 07:21 PM
Typically you just need to define QoS on the physical port and not the port channel.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide