power injectors

[curtw]

I would like to find the part numbers for power injectors approved for use with the WAP321, WAP 551, and WAP561  for North America

[Charles Hill · Accepted solution]

Hello curtw,

The following links point to the data sheets which will give you part numbers for the needed power supply.  It seems all 3 access points use the SB-PWR-12V-NA, but please reference the links to confirm.

 SB-PWR-12V-NA
Cisco Small Business 12V Power Adapter (North America)

http://www.cisco.com/c/en/us/products/collateral/wireless/wap321-wireless-n-selectable-band-access-point-single-point-setup/c78-697406_data_sheet.html

http://www.cisco.com/c/en/us/products/wireless/wap551-wireless-n-single-radio-selectable-band-access-point/index.html

http://www.cisco.com/c/en/us/products/wireless/wap561-wireless-n-dual-radio-selectable-band-access-point/index.html

Hope this helps,
if so, please rate.

[Leo Laohoo]

Let me tell you a little secret:  Cisco does NOT make power injectors.  They source the "Cisco-branded" power injectors from one manufacturer.  You can find 15.4w PoE power injectors HERE or you can also find 30.0w PoE+ power injectors HERE.

[muhasidd]

Hello Curtis ,

You can go through the following link

www.cisco.com/cisco/web/solutions/small_business/products/wireless/