Proper firmware version (older one) to run AIR-CAP3702I-E-K9 in standalone access point mode

[jmar83]

Hi there

"standalone access point mode" -> Which means that there is NOT special / proprietary Hardware (Rack device) or Software from Cisco necessary... so i can use it just as an "normal" access point (as a bride) in EVERY (Cisco-independent) network...

The Cisco "air-cap3702i-e-k9" Access Point Firmware Version 15.3.3-JPJ4 vom 2020-08-01 seems to have problems with standalone mode: The Web GUI contains some errors (javascript etc) and is painfully slow...

I read that i have to flash it with older firmware version - but the question still is: Which versions of older firmware EXACTLY?

Does somebody know what version i have to flash to reach my goal?

Maybe somebody has also a link to download it e.g. as a .zip file...?

Thank you very much for your feedbacks.

With kind regards,

Jan

[Leo Laohoo]

Autonomous IOS files can be found HERE.

[jmar83]

OK thank you very much. But which version of then is stable ao use it in "standalone" WLAN Access Point Mode without any problems in the web GUI. (Slowness, Javascript & other code errors)

Thank you very much for your feedback.

Kind regards, Jan

[jmar83]

Question in other form: Who uses that device successfully in Standalone AP Mode - with which SW version?

Thanks in advance for your feedbacks!!

Kind regards, Jan

[patoberli]

This might help:

https://community.cisco.com/t5/wireless/cisco-3702i-web-gui-won-t-update-settings-properly/m-p/4299863/highlight/true#M226758

[jmar83]

Thank you very much, will look on it!!

Best regards, Jan

[jmar83]

Will try it with http://37.156.146.163/PUB/Cisco/Wireless/1700_2600_2700_3600_3700/ap3g2-k9w7-tar.153-3.JD16.tar ...

Regards, Jan