02-21-2017 09:37 PM - edited 07-05-2021 06:35 AM
HI Team,
We have a foreign/anchor setup with three WLANs
Corpnet- For internal users
Devicenet- For BYOD
Guestnet- For Guest users
What we want to achieve is to change the profile settings so that all DeviceNet/GuestNet traffic to de-prioritised in (AF11) but with Jabber voice traffic to be in (EF) and Signaling in (CS3).
We have followed the below link
We also configured AVC and Paltinum profile on the anchor controller but we didn't find any marking on the voice traffic from Jabber installed on my Android Phone.
Please help.
02-22-2017 03:28 PM
but we didn't find any marking on the voice traffic from Jabber installed on my Android Phone.
You need to verify those end devices application classify traffic correctly.
Refer this post and get an idea what I am referring to. Then test with your device/os versions to ensure voice traffic is properly classified in wireless frames.
https://mrncciew.com/2013/01/08/byod-with-qos/
With AireOS 8.0 onward, there are way to trust DSCP of original packets (instead of rely on wireless frames UP value), See below to understand those differences.
https://www.youtube.com/watch?v=PhmhIojaEE8&t=57s
HTH
Rasika
*** Pls rate all useful responses ***
02-26-2017 07:27 PM
Hi Rasika,
Thanks for the reply.
I have checked the BYOD with QOS article on mrncview but to overcome this problem we have AVC.
My main concern is in Foreign/Anchor setup where should I apply the QOS profile and AVC settings, on Foreign WLC or on Anchor WLC?
03-02-2017 02:03 AM
Please refer the following link:
https://supportforums.cisco.com/document/11936816/cisco-guest-access-using-wlc-anchor-setup-%E2%80%93-release-70
03-02-2017 02:06 AM
Hi Yashas,
You didn't understand my question.
Guest anchor is already setup and is working fine.
I want to know where I need to implement QOS policies and AVC profile. On foreign controller or on anchor controller.
03-02-2017 06:31 AM
AVC in a foreign/anchor setup, should be done on the anchor.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html#pgfId-50573
-Scott
*** Please rate helpful posts ***
03-02-2017 07:17 PM
Hi Scott,
where I apply the QOS for voice traffic on Guest WLAN, on Foreign Controller or on Anchor Controller or on Both?
03-02-2017 08:31 PM
You should perform this on the foreign but it doesn't hurt to do this on both. Why are you anchoring voice?
-Scott
*** Please rate helpful posts ***
03-03-2017 12:33 AM
Scott,
We have a WLAN (Devicenet) for BYOD devices on which we are using Cisco Jabber. We want to prioritize the Jabber traffic only to EF and CS3 but other traffic stays on CS0.
-Tarun
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide