05-08-2024 04:03 PM
Hardware: an ME 8.10.190.0 cluster of 3802I.
If I set a customised "rf-profile" for my ap-group, does it overwrite the config made by "RF Optimization", or vice versa?
Thanks!
Solved! Go to Solution.
05-09-2024 06:07 AM
RF Optimization is a global configuration, whereas RF Profiles enable you to categorize a set of APs that share a common coverage zone together. This allows for selective adjustments to how RRM operates the APs within that coverage zone. By utilizing RF profiles and AP groups, you can fine-tune the RF settings for AP groups operating in various environments or coverage zones.
If RF Profiles are configured, they will be applied to the AP Group and essentially supersede RF Optimization.
RF Profiles offer detailed control over RRM configuration, while RF Optimization provides control parameters to adjust Client Density and Traffic Type.
Jagan Chowdam
/**Pls rate useful responses**/
05-09-2024 06:07 AM
RF Optimization is a global configuration, whereas RF Profiles enable you to categorize a set of APs that share a common coverage zone together. This allows for selective adjustments to how RRM operates the APs within that coverage zone. By utilizing RF profiles and AP groups, you can fine-tune the RF settings for AP groups operating in various environments or coverage zones.
If RF Profiles are configured, they will be applied to the AP Group and essentially supersede RF Optimization.
RF Profiles offer detailed control over RRM configuration, while RF Optimization provides control parameters to adjust Client Density and Traffic Type.
Jagan Chowdam
/**Pls rate useful responses**/
05-09-2024 06:15 AM
Many thanks, Jagan.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide