roaming issue between AP1231 and AP1260

[mlieber]

Hello,

a client has a roaming issue with summit clients

SDC-PE15N. He has installed the latest driver, now.

He has installed IOS-based AP1231 and IOS-based AP1260.

When a client roams from AP1231 to AP1260 and the N-standard is active then he has a roaming issue. He looses the connection for a few seconds.

If  802.11n is deactivated and 1MBps is configured as mandatory then roaming works fine.

Does everyone has an idea?

thanks

Martin

[Stephen Rodriguez]

That sounds more like the device needs 1mb as mandatory vs an 'N' issue per se.

N will work with 1M as mandatory.

Leave all the N config in place and set 1M a mandatory and let us know if roaming works as it should.

Steve

Sent from Cisco Technical Support iPhone App

[mlieber]

Thanks

I will try and let you know

best regards

martin