11-14-2012 06:44 AM - edited 07-03-2021 11:02 PM
hello everybody
i have a question..
is it possible to change the web authentication login from https://1.1.1.1
this is for to avoid the certificate error that you get when logging in to the web page.
Solved! Go to Solution.
02-28-2013 04:40 AM
You can, but on 7.2 it was broke. I know the feature works on v7.3 and 7.4 since I recently tested it. On the lower code versions you would still have to disable https for management to get that to work.
Sent from Cisco Technical Support iPhone App
02-28-2013 05:00 AM
Here is a screen shot
Sent from Cisco Technical Support iPhone App
11-14-2012 07:14 AM
If you are running 7.2 or better for your code version it is.
Config network web-auth secureweb disable
If you are below 7.2 you have to completely disable https for mgmt as well
Sent from Cisco Technical Support iPhone App
11-22-2012 07:13 AM
Thanks that work!!
Sent from Cisco Technical Support iPhone App
11-23-2012 05:21 AM
Why don't You see what's happening with the certificates?
Sent from Cisco Technical Support iPad App
11-26-2012 09:41 AM
or just install a valid certificate from Globalsign, Verisign and so on
Good work!
Regards,
Erik
02-28-2013 04:18 AM
stephen Rodriguez
you say that if i had a version 7.2 or better i could disable the guest webpage separate from the mgmt ?
02-28-2013 04:40 AM
You can, but on 7.2 it was broke. I know the feature works on v7.3 and 7.4 since I recently tested it. On the lower code versions you would still have to disable https for management to get that to work.
Sent from Cisco Technical Support iPhone App
02-28-2013 05:00 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide