I have problem with my air ap 1702i converted to w7 ios.all is ok but when i login on web gui and try save or apply anything i get error 404 not found
Any tip
Tnx
So, I am having the same issue after change a 3503i AP over to autonomous mode. I don't have an issue configuring it via CLI, but I would like to have accessed and being able to make changes via the GUI. ap3g1-k9w7-tar.153-3JF12i.tar is the OSI
Has anyone found a working solution?
This version is supposed to work: ap3g2-k9w7-xx.153-3.JF10 (ap3g2-k9w7-tar.153-3.JF10.tar)
https://software.cisco.com/download/home/283307699/type/284180979/release/15.3.3-JF10
I am using ap3g2-k9w7-xx.153-3.JF14 which has the same problem for me.
However I do not have a valid Cisco support account (this AP was gifted to me).
Downgrading or upgrading through my own account is not an option for me. Anyone able to help me out?
Thank you, you are amazing! It is fixed now
You are welcome
Hi,
I have the same problem with an 3702i. Do you have a firmware for this one? I'm unable to download it.
Thanks
I Have sent you an email.
It works with the older firmware ap3g2-k9w7-tar.153-3.JAB.tar.
Many thanks!
Good day Umair Awan!
I have:
Product/Model Number: AIR-CAP2702E-E-K9
System Software Filename: ap3g2-k9w7-xx.153-3.JPK1
System Software Version: 15.3(3)JPK1
Bootloader Version: BOOTLDR: C2700 Boot Loader (AP3G2-BOOT-M) LoaderVersion 15.2(4)JB5m, RELEASE SOFTWARE (fc2)
and when changing settings, get error: 404 not found!
Please help fix this!
Hi,
Clean install older version like which were released upto year -2017.
Hi
Had same problem using ap3g2-k9w7-tar.153-3.JPK2.tar
Solved with ap3g2-k9w7-tar.153-3.JPJ2.tar
hope it help