wireless module different IP addresses

[pcfreak49]

hello I have a problem with my wireless router, cisco wireless module allows you to give different IP addresses so that IP addresses are different who can help me please

[pcfreak49]

you mean so

the int vlan needs in the AP?

[Surendra BG]

int vlan should be on the Router not on the AP..

that is..

on the router

===========

int vlan 1

ip addr 20.10.10.1 255.255.255.248

no shut

end

On the AP

==========

int bvi 1

ip addr 20.10.10.2 255.255.255.248

no shut

end

ip dhcp pool R2.ap-pool
   import all
   network 20.10.10.0 255.255.255.248
   domain-name home.be
   default-router 20.10.10.2

The above will do!!

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

[Surendra BG]

did that work??

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

[pcfreak49]

so these are the two running-config of the router and AP

hope it's true

[Surendra BG]

Now its nice to troubleshoot since we have both the running configs!! yes u are right.. we have 2 running configs one on the AP and other on Router..

the config is very badly messed up on the router and the AP.. please answer the below questions..

I can see VLAN 1 and VLAN 2 configured.. and the WLAN-AP 0 is mapped to come other subnet..This will not work.. the AP ahould be either in VLAN 1 subnet or VLAN 2..

1>> Lemme know in which subnet u need the same??

2>> In which subnet do u want your wireless clients to get the IP??

i have attached the config which i am using in my LAB.. please check that out and lemme know if u have any doubts..

Regards
Surendra

[Surendra BG]

Please let me know ur requirements.. i will try to modify the confiug and help u out in getting the network up and running!!

Regards

Surendra

[Surendra BG]

lemme know if ur facing some issues with internal DHCP

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

[pcfreak49]

Thanks to the two running-config of the router now I can compare
and see what I need to change

If I send files through wireless and then reboot the wireless module
do you think?

[Surendra BG]

Ok.. i am sorry.. i did not understand "If I send files through wireless and then reboot the wireless module do you think?" please brief me out..

Please dont forget to mark the posts as answered if this was helpfull..

Regards

Surendra

[pcfreak49]

yes I have a 800 series router when I send files to a different device than the wireless module will reboot I thought maybe it has to do with same network is shared

[Surendra BG]

Hmm.. may be not sure.. have not come across anything like this till now!!

Regards

Surendra

[pcfreak49]

if you've even done a couple of files are sent by wireless mb or gb?

[pcfreak49]

I leave tomorrow or the day you definitely know if it works or not

[Surendra BG]

ok!! will be looking forward to hear from you!!

Regards
Surendra

[pcfreak49]

I've tried but can not