03-28-2018 10:07 AM - edited 07-05-2021 08:26 AM
Solved! Go to Solution.
03-28-2018 09:00 PM
03-28-2018 10:17 AM
03-28-2018 10:29 AM
Please share this outputs:
show sysinfo
show time
show ap join stats detailed <mac-address>
03-28-2018 12:16 PM
03-28-2018 06:04 PM
03-28-2018 06:14 PM
Ok.
please keep this link and find the section "Adding MAC Addresses of Mesh Access Points to the Controller Filter List" you need to add the Mac address in the WLC or as Leo say convert the operation mode of the AP to local mode. If you prefer to do it in CLI mode do this.
config macfilter add ap_mac wlan_id interface [description]
A value of zero (0) for the wlan_id parameter specifies any WLAN, and a value of zero (0) for the interface parameter specifies none. You can enter up to 32 characters for the optional description parameter.
Step 2 Save your changes by entering this command:
***Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**
*Tu reconocimiento nos alienta a seguir participando en los foros *
** ¡Las calificaciones fomentan la participación! **
Por favor asegúrese de calificar las respuestas a sus preguntas.
03-28-2018 06:23 PM
03-28-2018 06:38 PM
03-28-2018 09:00 PM
09-12-2019 11:23 AM
Hi Experts.
We are currently proposing AP1562E but 2 of them will work in mesh mode,
We have a WLC 5508 with version 8.5.131, within this version of code does it support the configuration of Mesh? Have a Master and the other Access Point take a sign of this?
Anyone know anything about it.
Regards.
Carlos P.
09-13-2019 01:51 AM
09-13-2019 08:33 AM
Thanks for answering,
If I understand that version 8.5.131 is not recommended. I will update the WLC version to 8.5.151
What we want to do for distance issues to wire an AP 1562E and this is the ROOT and have another AP 1562E take the signal of the AP that is wired. Both have line of sight, we want it to work as a repeater that is wired.
This is possible, the distance between Access Point is approximately 60 meters
Regards
Carlos P.
09-13-2019 04:12 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide