ā10-25-2023 06:02 AM - edited ā10-25-2023 06:15 AM
My WLC has 45 permanent licenses and all are in use. Also, I see that WLC has an evaluation license with 12 12-week expiry, with a 1500 RTU license. Evaluation license in Inactive and permanent license is active
Now if I want to add one more AP, can I enable an evaluation license with a permanent license? Does that mean both can work ???
What is the solution to add one more AP? If I activate the evaluation license then I believe AP will be registered on it on a temporary basis but after the activation evaluation license, will my permanent license become inactive? IF yes then making it permanently active again is easy or challenging?
Solved! Go to Solution.
ā10-25-2023 11:45 PM
Yes, what I sent you above is same thing, its just CLI instead of GUI. When you add license its not for 12 weeks only, it will be added to permanent pool until you remove that 1 license.
ā10-25-2023 08:32 AM - edited ā10-25-2023 08:35 AM
you can just do "license add ap-count 1" from CLI, type "Y" to accept RTU terms.
it will add 1 license to your permanent count.
its RTU so no enforcement, but to be compliant Cisco expects you to use the count as much as licenses you have purchased.
ā10-25-2023 09:02 AM
Thanks Ammahend for your reply.
So adding license as you said, will be temporary basis , isn't it ?
ā10-25-2023 09:39 AM
>... will be temporary basis , isn't it ?
- It will be permanent , only Cisco expects that you still buy license(s) as needed ,
M.
ā10-25-2023 09:45 AM
Thanks Marce
ā10-25-2023 10:32 AM
you can add 1 licenses and also delete 1 license later.
(WLC01) >show license permanent
RTU License Count: 440
(WLC01) >license add ap-count 1
(WLC01) >show license permanent
RTU License Count: 441
(WLC01) >license delete ap-count 1
(WLC01) >show license permanent
RTU License Count: 440
ā10-25-2023 11:28 PM - edited ā10-25-2023 11:36 PM
I am attaching a snap. Can I do the same for my scenario? And additional 1 license will be for 12 weeks? Thanks in advance.
ā10-25-2023 11:45 PM
Yes, what I sent you above is same thing, its just CLI instead of GUI. When you add license its not for 12 weeks only, it will be added to permanent pool until you remove that 1 license.
ā10-26-2023 12:00 AM
Thank you very much Ammahend. One more query, pls help me. after adding the license, is it required to reboot WLC ?
ā10-26-2023 04:17 AM - edited ā10-26-2023 04:18 AM
No, you will immediately see the count change.
ā10-26-2023 11:26 PM
Ok. understood. Thanks for help
ā10-26-2023 04:03 AM
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide