04-25-2005 03:14 PM - edited 07-04-2021 10:42 AM
I'm trying to add a new campus, but nothing happens!
The WLSE version is 2.11.
Is there anyone out there who has succeeded with creating a new campus in this release?
Thanks!
04-25-2005 04:50 PM
Are you using IE?. Try re-loading the box and see if it helps.
04-26-2005 12:07 PM
I ran into this exact same issue yesterday with 2.11. I will try the suggestion of a box reload and see if that helps. I was accessing WLSE via IE 6.0 SP1.
D
04-27-2005 12:24 AM
I have also recently installed Ver 2.11 on the WLSE.
I have tried adding a Site/Campus with IE and with Mozilla. There doesnt seem to be a way to add a site or campus through the command line.
Might have to wait for Cisco's next release.
04-27-2005 01:41 AM
I have managed to install a new Campus/Site.
I had to restart the actual WLSE Device.
When it came up worked fine.
04-27-2005 05:20 AM
Still getting the same issue. Have reloaded WLSE from within the webadmin no joy. Have reloaded from the CLI - no joy. Have shut device down and then repowered - still no joy. Using IE 6.0 SP1 with JRE 1.4.2_06.
Any one else still having the same issue after reloading. Tried with my own account (Sys admin role) and with the default admin account. Both the same.
TIA
D
04-27-2005 08:15 AM
My initial joy was short lived. When I first tried to add a campus and click OK on the Campus/Site add
dialog it never went through just would apply the command.
Once I reloaded the box it came back with the name of the campus that I was trying to create in the list. But when I tried to create another campus it wouldnt go through, not even a reload of the box again would put it in the list.
Seems like the software needs a bit of work.
04-28-2005 07:15 AM
It didnt work for me, but I have opened a TAC case on this problem!
04-27-2005 11:52 PM
Have a look in the Java console when you hit the OK button when trying to add a campus. I get an error that seems to be database related.
When I get a chance I'm going to try a clean install of 2.11 as I suspect the upgrade from 2.9 hasn't gone perfectly smoothly.
04-29-2005 02:49 AM
It could be an impact from the bug in AP's reports that may have created excessive amount of rogues in database.
Please check if this is the case.
1. http://wlse-address:1741/debug/dbquery.jsp
select count(*) from l2devices
2. If the value is more than, say 5,000, try follow the step below
3. http://wlse-address:1741/debug/dbupdate.jsp
delete from l2devices
4. Go to Admin page and restart services
05-09-2005 03:46 AM
Just finished a clean install of 2.11 built from the ISO image on CCO (May image not the april release) and I can now create different Sites without an issue. I note there is now a download file to apply to 2.9.1 BEFORE you upgrade to 2.11. You also have to take a backup after applying the patch but before the upgrade.
HTH
D
06-23-2005 05:51 AM
Anyone get a REAL answer for this? I just opened a case, but was wondering if anyone else has gotten a solution other than reload the box from scratch.
One of the boxes I upgraded had nothing on it, so to me the 'reload' solution is ridiculous. Upgraded a 2.9 and a 2.9.1 box (applying the pre-patch to both). Both have the same problem.
06-23-2005 08:58 AM
I got a solution at last...
Had to use a 2.11 recovery CD, and start from beginning. But the upgrade solution was really bad. We started from v. 2.9 -> 2.9.1a -> fix -> 2.11 with no luck!
After this action we dont have any problems so far.
Jan-Erik
06-23-2005 11:50 AM
OK..here's the real solution:
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsb00795
In case the link doesn't work...here's the bug fix procedure:
Login to WLSE as admin user.
Goto http://
Enter the following SQL statement:
create sequence siteid_seq as integer start with 10001 increment by 1 minvalue 0 no maxvalue no cycle no cache
06-27-2005 04:17 PM
I just duplicated this and it works.
Thanks
:-) Ed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide